_______________Gift Card Holder Instructions_______________
Step 1: Cut a piece of card stock to 3" x 11" (Heavy Weight cardstock)
Step 2: Score the base at 8-1/2", 7-3/4", 4", and 3-1/4".
Step 3: Use bone folder to crease all the score lines.
Note: The shorter section is the top of the holder.
Step 3: Create your pockets (I used four (4) for this project).
Cut a piece of card stock to 6” x 4”
Step 4: Score the card pockets at 3-1/4” and 1/2"
Step 5: Turn the paper and score down at 1/2"
Step 6: Cut each pocket as shown below:
Step 7: Use a bone folder to crease all the score lines.
Step 8: Add liquid adhesive to both tabs to create the pocket.
Step 8: After you assemble the pockets, use a small circle die or punch to cut the same size hole each pocket as shown below. This makes it super easy to pull the pockets.
Step 9: Use liquid adhesive to attach the pockets to each other.
Start by glueing the first pocket to the inside center of the card base (do not go over the score lines) and stack the remaining pockets on top of each other.
*Reminder: The shorter folded side is the top of the holder.
Optional: For the final pocket, pull up the bottom of the holder and attach it to the top pocket. This will allow the pockets to pull open when you open the holder.
Step 10: To complete the project, attach a small Velcro dot to keep the holder closed.
Step 11: Decorate with pattern paper and enjoy!
